: Prolific or CH340 USB-to-Serial drivers, depending on your cable's chipset. đź’ľ Software Options There are two main ways to manage your radio's frequencies: Factory Programming Software : Usually titled KD-C1_SETUP.exe .
Which (Windows 10, Windows 11, or Mac) your computer uses? Do you already own the 2-pin USB programming cable ?
Always click "Read" before making changes. This pulls the current factory settings so you have a backup.
Its small size, USB charging, and impressive advertised range of in open areas make it an ideal choice for various users, including staff in hotels and restaurants, security personnel, and outdoor enthusiasts. To get the most out of these features, you'll often need to customize its settings.
Assign specific UHF frequencies to any of the 16 channels. Wln Kd-c100 Programming Software Free
If you are using CHIRP on , you will also need Wine (version 2.8 or higher) to run the Windows‑based proprietary software, as described by Marc Stuff in his guide for the WLN KD‑C1PLUS.
Toggle between high and low power (depending on the model).
Sub-audible tones that prevent hearing other conversations.
Stop hearing cross-talk from other radio users nearby. : Prolific or CH340 USB-to-Serial drivers, depending on
Allows for basic frequency entry, CTCSS/DCS tones, and squelch settings.
Keep the cable steady and do not turn off the radio while data is transferring.
This procedure works for the official WLN software. For CHIRP, the steps are similar but the menu names differ.
: Program specific UHF frequencies within the 400-470MHz range. Privacy Tones Do you already own the 2-pin USB programming cable
For the related model, the software can be obtained from the Anysecu website: https://www.szanysecu.com/h-col-106.html – look for the file “KD‑C1plus.zip”.
If you’d like, I can:
“WLN UHF Radio programming softwares and image for the following models below. … The programming cable is easily available online.”
CHIRP is a free, open-source, community-driven radio programming tool that supports hundreds of radio models, including the WLN KD-C100 (often listed under its clone names, such as Retevis RT22 or Zastone X6).
: Some hobbyists use a "soft mod" by editing the config.ini file to attempt expanding the frequency range, though hardware limitations may affect performance outside the native UHF band.
I can provide the exact frequency grids or troubleshooting steps for your setup. Share public link