Avery Berkel L115 Manual New [better] Info

The L115 is designed to handle multiple analog inputs, providing flexibility for connecting to various load cells.

Remove weight from pan and reboot. Ensure pan is clear on startup.

Locate the zero-adjustment knob, usually positioned underneath the front edge or side of the main housing base.

If the indicator needle swings violently back and forth for too long before settling, the hydraulic dashpot requires servicing:

If the scale is used in dry environments, keep these points clean and dry. In highly corrosive or damp environments, apply a very light film of fine machine oil to prevent rusting. Troubleshooting Common Issues Potential Cause Platform is rubbing against something; debris underneath.

Read the chart from a direct, eye-level angle to prevent parallax reading errors. 4. Calibration and Zero Adjustment

If you are looking for one rather than selling one.

Binding linkages; scale is not level; friction on the pillar rod.

Place the stainless steel weighing platter onto the top of the scale.