Always refer to the original manual included with your specific model year. If your manual is lost, contact DP Fitness customer support. This guide is for informational purposes based on common configurations of the DP Dual Trac 20.
Attach the fixed pulley brackets to the top frame and the base. Note the orientation: the "open" side of the bracket should face where the cable will enter. Step 4: Cable Routing (The Critical Phase)
Next, you will build the vertical structure that houses the weight stacks.
Lift the top crossmember (the overhead overhead bar that holds the lat pulldown system) to the top of the main vertical mast.
: Lay the bottom frame piece flat. Attach the two upright bars that will eventually hold the weight plates.
This is where most assemblies fail. The DP Dual Trac 20 uses two independent cables (one per side). Do not mix them.
If one arm feels looser than the other, adjust the cylinder settings on both sides to match.
Bring the cable up to meet the floating pulley block suspended from the upper system.
If you’d like me to help you from that manual, just paste the text or describe the diagram, and I’ll explain it clearly.
The DP Dual Trac 20 is a classic, highly versatile cable crossover and home gym system. It utilizes a dual-weight stack and adjustable pulleys to offer a full-body workout in a compact footprint. Because it relies on a precise system of cables, pulleys, and heavy steel frame pieces, correct assembly is absolutely critical for your safety and the smooth operation of the machine.
Sort hardware into small bowls or a magnetic tray. Label them using the sticker sheet often provided in the manual.
The foundation of the unit provides the necessary stability for heavy lifting.
: Attach the swinging arm pieces using the provided rods, bolts, and nuts. It is vital to screw these in evenly on both sides so the gaps remain uniform.
Create a stable base that won’t rock.
Stand the heavy left and right vertical upright posts onto the base frame. Secure them at the bottom using the provided hex bolts and washers.