Manual — Keyence Gs-11pc

Open the guard to ensure the machine stops immediately.

Align the center marks engraved on both the sensor and actuator bodies. Environmental Considerations

ISO 13849-1 (Category 4, Ple), IEC 61508 (SIL 3) Wiring Configurations and Pinouts

The KEYENCE GS-11PC Go to product viewer dialog for this item. keyence gs-11pc manual

Regular maintenance is crucial for the KEYENCE GS-11PC's performance and longevity. The manual provides guidance on:

The manual for the KEYENCE GS-11PC would likely cover several critical areas:

The GS-11PC utilizes an M12 plug-in connector interface. To maintain the structural safety integrity (PLe/SIL3), the dual safety outputs (OSSD1 and OSSD2) must be wired to an appropriate safety relay, safety controller, or safety PLC. M12 Connector Pin Assignment Pin Number Wire Color Signal Name Description Main Power Supply (+24V) 2 Safety Output 1 (PNP) 3 Power Supply Ground (0V) 4 Safety Output 2 (PNP) 5 Auxiliary Output (Non-safety status) 6 External Device Monitoring or Reset input 7 Interlock selection input 8 T1/T2 Loop Cascade / Series connection input Standard Connection Circuit Connect Pin 1 (Brown) to the +24VDC safety power bus. Connect Pin 3 (Blue) to the 0VDC common line. Open the guard to ensure the machine stops immediately

Complies with ISO 13849-1 (Category 4, PLe) and IEC 61508 (SIL3) for high-risk applications.

According to the standard GS Series wiring guide, the pin configuration for the GS-11PC is: : +24 VDC Power Supply. Blue (Pin 3) : 0 V (GND). Black (Pin 5) : OSSD 1 Output. White (Pin 6) : OSSD 2 Output. Red (Pin 2) : Solenoid Control Input (apply 24V to unlock). Pink (Pin 4) : Auxiliary Output (non-safety monitoring).

IP65/67/69K ratings for washdown resistance. Regular maintenance is crucial for the KEYENCE GS-11PC's

For further assistance or to access additional resources, including FAQs, technical support, and software updates, visit the KEYENCE website or consult the manual.

For the in the chain (farthest from the panel), connect its OSSD 1 and 2 inputs to +24 VDC.